Resource Room Access
Step 1.
Use the metal door in front of the building, nearest Brandt Pike.
Step 2.
Using the locking keypad, enter the code 345689.
Then press the unlock button.
Step 3.
When you enter, there should be a beeping noise. On the wall to your right is an alarm keypad.
Pull down on the panel to reveal the buttons.
Disarm the alarm by entering the code 7010, then press [1 OFF]
The beeping should stop and the LED light will change to green.
If the beeping continues after two attempts, call Shiver Security at
937-228-7301.
IMPORTANT!
DO NOT enter the GDAB office space. The inside doors are locked and alarmed separately. If you go into these offices, the alarm will sound!
Retreive your items, load your vehicle, and proceed to the next step.
Step 4.
After you have retrieve your items, you will need to rearm and lock the door.
To arm the alarm, re-enter the code 7010, then press [2 AWAY]
It should begin to beep again. You have 60 seconds to leave the building.
Remember to lock the building. At the keypad outside, enter 345689 and press the lock button. You will hear the lock engage (and may see it slide over).
